Description
The universal V-280 refrigeration system is designed for the full range of fresh and frozen applications on small trucks and vans. Unit controls install in the cab within easy reach of the driver. The road compressor is powered by the vehicle's engine and includes both Jet Cool™ and Jet Lube™ compressor injection systems to maximize compressor reliability and longevity. Units may be equipped with drop-in electric standby option for any voltage.

V-280 Models Available

• Engine cooling
• Engine cooling with electric standby
• Optional truck coolant heat system
• Optional electric standby heat system

  Compressor
  Unit rated with 6 cylinder swash plate compressor, 10.5 cu. in. (172 cm³) displacement as standard. (Note: Other compressors used to accomodate certain engine and chassis configurations may affect cooling capacity.)

Refrigeration Capacity
System net cooling capacity at 100ºF (38ºC) ambient and 2,400 compressor rpm.
 

European Standard
System net cooling capacity under ATP conditions including 30ºC (86ºF) ambient.
 

Heating Capacity (optional)
System net defrost/heating capacity at 180ºF (82ºC) coolant, 3gpm (11 LPM) coolant flow.
 

Evaporator Blower Performance
Evaporator blower performance at 0 in. (0 mm) water column external static pressure.
 

Electric Motors
Condenser fan motor: 12vdc, 1/6hp/.12kW
Evaporator fan motor: 12vdc, 1/6hp/.12kW
Total unit current draw: 20A at 12 vdc
Optional 24V converter available.

Electric standby compressor drive motor:
115V/1 Phase/60Hz, 1.5 hp/1.12Kw, 15 FLA
230V/1 Phase/60Hz, 2.0 hp/1.49Kw, 8.6 FLA
230V/3 Phase/60Hz, 2.0 hp/1.49Kw, 6.0 FLA
220V/1 Phase/50Hz, 1.7 hp/1.27Kw, 10 FLA
380V/3 Phase/50Hz, 1.6 hp/1.19Kw, 3.2 FLA

• µP-VP SMART REEFER controller
• In-cab keypad display unit
• Electric thermostat
• Automatic hot gas defrost
• Polypropylene external cover

• Jet Cool™ compressor injection cooling
• Jet Lube™ compressor injection lubrication
• Installation kit with hoses, fittings & hardw.

• Refrigerant low and high pressure cutout
• Refrigerant high pressure relief valve
• Motor overload protection
• 30 amp fuse

• Low temp conversion kit, R-404A
• Coolant heat kit
• Electric standby heat system
• Horizontal frontmount kit

• Roofmount hardware kit
• External hose routing kit
• Rear hose exit kit
• One-piece conversion kit

• In-cab control dash mount kit
• 24V dc converter
• Optional compressors
• Door switch