|
Description
The multi-temperature TLE system features the frontmount host unit and two
TLE evaporators. The unit provides high-capacity, direct expansion cooling
and heating for accurate temperature control from -20°F to 80°F (-29°C to
27°C) with totally chlorine-free R-404A refrigerant.
Models Available
Host Unit(cooling and heating)
Model 50: Engine/electric standby operation.
System evaporator combinations:
| RD-TLE: |
TLE-2 & TLE-3 |
| |
TLE-2 & TLE-4 |
| |
TLE-3 & TLE-3 |
|
RD-TLE Cooling And
Defrost/Heating Capacity
Both remote evaporators operating.
| |
Cooling |
Heating |
| Return
Air |
Capacity |
Capacity |
|
Temperature |
Btu/hr |
Watts |
Btu/hr |
Watts |
|
| Engine
Power: |
| 35ºF |
23,000 |
6,765 |
15,000 |
4,400 |
| 0ºF |
16,100 |
4,735 |
15,000 |
4,400 |
| -20ºF |
10,000 |
2,940 |
15,000 |
4,400 |
|
Electric Power: |
| 35ºF |
19,000 |
5,590 |
11,250 |
3,300 |
| 0ºF |
13,150 |
3,870 |
11,250 |
3,300 |
| -20ºF |
9,100 |
2,675 |
11,250 |
3,300 |
|
Operation Host unit
|
- Clean and silent TK 3.95 diesel engine
- X426 compressor
- Electric motor (model 50):
-230V/3 Phase/60 Hz 5.0 hp
- TG-V in-cab dual-temp controller
- Host unit controls & gauges
- single temp/multi-temp switch
- On-off switch
- Preheat/start switch
- Hour meter, engine
- Reset switch, engine protection
- Reset switch, electric motor (model 50)
- Coolant protection
- Coolant level gauge
- 50:50 antifreeze
- Radiator coolant reserve
|
- Heavy-duty EPDM coolant hoses
- Corrosion-resistant protection
- Powder-coated aluminum frame
- SMC high pressure molded fiberglass reinforced
polymer outer panels
- Stainless steel condensor exterior hardware
- Stainless steel evaporator hardware
- Coated refrigerant tubing
- Maintenance reduction features
- Alternator, 90 amp 12V dc
- Oil bath air cleaner
- Spin-on fuel filter
- Full-flow oil filter
- Tapered roller bearing idler pulley
|
- Protection devices
- Engine coolant high temperature cutout
- Engine low oil pressure cutout
- Refrigerant high pressure cutout
- Refrigerant high pressure refief valve
- Motor overload protector (model 50)
- 12V circuit breaker (current limiter)
- Two circuit breakers in control circuit
- Installation kit
- Installation hardware
- Battery cables
- Electric fuel pump
- Electric fuel lines
|
- Host unit
- Battery, 12V (dealer supplied)
- Battery box, universal
- CYCLE-SENTRY start/stop control system
- Electric heater strips (model 50)
- Door Sentry II door switches
|
- Fuel heater (factory installed)
- Gauge package: amp/oil/water
- Stainless steel grille
- Fuel tanks (bands and brackets included):
-30 gal. (114 liter) undermount/end-fill steel
-30 gal. (114 liter) undermount/side-fill steel
|
- Hour meter, electric operation (model 50)
- Paint, special color
- Silicone coolant hoses
- Sound reduction kit
- Dry-type air cleaner
- Condenser top screen
|
Standard
Features