GSD Refrigerated Leasing Inc.    

        "Setting New Standards in Specialty Trailers for the 21st Century"  

    

                                   

            9 Chapin Street, Winchester, MA 01890

            242 New Zealand Road - Route 107, Seabrook, NH 03874

           

            (Mailing Address Only) P.O. Box 271, North Reading, MA 01864

            Phone (781) 245-4005    Fax (781) 729-8900

            gsd@gsdrefrigeratedleasing.com

 

THERMO KING KD-II SR Specifications
(please be aware this is a Thermo King product.  GSD has no association with Thermo King) 

Description
A one-piece, frontmount, high-capacity, diesel-powered cooling and heating system for straight trucks. Designed for use with totally chlorine-free R-404A refrigerant. Powered by special Clean and Silent diesel engine.

Features belt driven dual evaporator fans for superior air throw. Exclusive spacesaver condensor provides maximum cab clearance and reduced truck body height on conventional chassis. Cubesaver evaporator optimizes space below the evaporator for all types of cargo. Lightweight aluminum frame allows for increased payload.

Industry leading SMART REEFER microprocessor controller provides continuous monitoring, advanced diagnostics and eases troubleshooting. TherMax™ defrost/heating system increases unit heating capacity for faster defrost.

Models Available
KD-II 30 SR: Cooling and heating on engine operation.
KD-II 50 SR: Cooling and heating on engine and electric standby operation.

Refrigeration Capacity
System net cooling capacity at 100ºF (38°C) ambient and high speed engine/60 Hertz electric power operation.
 

Evaporator     with R-134a
Return Air Btu/hr Watts Btu/hr Watts
Engine Power:
35ºF (2ºC) 18,000 5,270 18,000 5,270
0ºF (-18ºC) 12,000 3,520 8,000 2,340
-20ºF (-29ºC) 7,500 2,200 - -
Electric Power:
35ºF (2ºC) 14,500 4,250 14,500 4,250
0ºF (-18ºC) 10,500 3,080 7,500 2,200
-20ºF (-29ºC) 6,800 1,990 - -

Defrost/Heating Capacity
System net heating capacity at -20°F (-29°C) ambient and high speed engine/60 Hertz electric power operation.
 

      with R-134a
Operation Btu/hr Watts Btu/hr Watts
Engine Power 14,000 4,100 13,500 3,960
Electric Power 11,500 3,370 11,200 3,280

Proven, High Performance Compressor

  • Thermo King X214, two-cylinder
  • 13.92 cu. in. (228 cm³) displacement

     

Operation

  • Continuous run cool/heat on engine or electic standby operation
  • Start/stop cool/heat on engine or electric standby operation in Cycle-Sentry mode
  • Automatic defrost initiation & termination with microprocessor controlled "Smart Defrost" designed to minimize defrost time
  • Automatic defrost initiation with air switch

    Evaporator Blower Performance

  • Evaporator blower performance on high-speed engine operation at 0 in. (0 mm) water column external static pressure:
    Airflow volumn: 1,600 ft³/min. (2,720 m³/hr)
    Discharge velocity: 25.8 ft/sec/ (7.9 m/s)

    Clean And Silent Engine

  • TK 3.74 diesel engine
  • Conforms to all CARB '95 emission standards
  • Three-cylinder, liquid-cooled
  • 45.0 cu. in. (740 cm³) displacement
  • 8.8 qt. (8.2 liter) oil capacity

    Electric Motor (model 50)

  • 230V/3-Phase/60Hz, 5.0 hp

     
Standard Features
  • SMART REEFER (µP-T) microprocessor controller features:
    • Cycle-Sentry start/stop control system
    • In-cab remote display
    • Continuous system monitoring
    • Unit self check/pre-tripping
    • 40 alarm codes (the most thorough in the industry)
    • Diesel-electric auto switching (50 model)
    • Smart Defrost
    • 6 hour meters (3 programmable)
    • Programmable set point range
    • Low-speed lock-in (low noise operation)
    • Choice of units of measure
  • TK 3.74 clean & silent diesel engine
  • Model X214 high-performance compressor
  • TherMax™ system for faster defrosts, greater heating capacity
  • Automatic phase correction (50 model)
  • Three-way control valve
  • Receptacle AC, 230V (50 model)
  • Corrosion-resistant protection for extended system life, long lasting appearance
    • Polyester powder-coated aluminum frame
    • Stainless steel condenser exterior hardware
    • Stainless steel evaporator hardware
    • Coated refrigerant tubing
  • Maintenance reduction features
    • Alternator, 23 amp 12V dc
    • Oil bath-type air cleaner
    • Spin-on fuel filter
    • Full-flow oil filter
    • Tapered roller bearing fanshafts
    • Tapered roller bearing idler pulley
  • Protection devices
    • Engine low oil level switch
    • Engine coolant high temperature cutout
    • Engine low oil pressure cutout
    • Refrigerant high pressure cutout
    • Refrigerant high pressure refief valve
    • Motor overload protector (50 model)
    • 12V circuit breaker (current limiter)
  • Installation kit
    • Installation hardware
    • Battery cables
    • Electric fuel pump
    • Fuel lines
    • Fuel tank pickup and return tube
Optional Features
  • Data logging
  • Body-mount control box (µP-T)
  • Low decibel sound reduction package (6 dBA)
  • R-134a refrigerant
  • Air cleaner, dry type
  • Easy-read thermometer
  • Bypass oil filter
  • Remote lights
  • Silicone coolant hoses
  • Door Sentry 1 door switch
  • Electric motors (50 model only)
    -380V/3-Phase/50Hz, 4.2 hp
    -460V/3-Phase/60Hz, 5.0 hp
    -230V/1-Phase/60Hz, 5.0 hp
  • Electric heater strips (50 model)
  • Stainless steel grill
  • Top screen condenser
  • Diesel fuel heater
  • Battery box, universal
  • Battery, 12V (dealer supplied)
  • Fuel tanks (bands and brackets included)
    -30 gal. (114 liter) undermount aluminum
    -50 gal. (190 liter) undermount aluminum
Weights and Dimensions
Weight (approximate)
  lbs kg
KD-II 30 SR 770 350
KD-II 50 SR 820 372
 
Dimensions inches (millimeters)
  Height Width Depth
Condenser 23.25 (591) 65.25 (1657) 30.00 (762)
Evaporator 11.50 (292) 48.08 (1221) 28.75 (730)
In-cab Controls 2.32 (58.93) 7.36 (186.94) 1.63 (41.40)
KD-II SR

Specifications are subject to change without notice